Pride Carbon Gravity Pro 20'' Rim 36h Ud Gloss

PRIDE GRAVITY RIM

Designed and developed exclusively for BMX Racing, the Pride Gravity rim meets the most extreme demands of the discipline.

The Gravity is built using Toray T700 carbon and features a low-profile design: 30mm height and 30mm width. These dimensions reduce wind resistance while optimising both vertical and lateral stiffness.

It is compatible with both disc brakes and rim brakes. This rim is compatible with tubeless setups.

FEATURES

• Material: Toray T700 Carbon
• Size / ETRTO: 20" / 406
• Number of holes: 36
• Height: 30mm
• Width: 30mm
• ERD: 375mm
• Valve type: Presta
• V-brake compatibility: Yes
• Tubeless compatibility: Yes
• Tire compatibility: 20x1.40" - 20x1.90"
• Finish: UD Gloss / Water decal under clear coat
• Weight: 330g

RECOMMENDATIONS / INSTALLATION

Please strictly follow the recommendations below, otherwise the product warranty may be void:

• - Do not exceed the maximum tyre pressure
• - 3-cross lacing only, no radial lacing
• - Recommended spoke tension: 110 kgf
• - Can be used front or rear with disc or V-brake