Pride Matrix Tapered 24" UD Gloss Fork - 20mm

PRIDE MATRIX TAPERED 24" FORK

With its glossy/matte finish, the new Pride Matrix fork boasts a sleek and elegant design. It is composed of two distinct parts. The fork legs are made from 100% Torray® HM carbon, combined with an internal PMI polymer structure, which increases overall stiffness and strength. Different types of carbon fibers are used based on their specific properties to best manage various loads in areas where they occur such as lateral loads, torsion, and impacts.

The steerer tube is made from 7075-T6 aluminum, a high-strength alloy known for its durability and resistance. This feature ensures not only strong structural integrity but also enhanced longevity.

Complies with EN 16054 standard.

SPECIFICATIONS

• Material : Torray Carbon / 7075 Aluminum
• Wheel size : 24"
• Axle : 20mm (not included)
• Steerer diameter : Tapered 1"-1/8 to 1.5"
• Steerer length : 165mm
• Fork height : 357mm
• Offset : 30mm
• Compression bolt : M22x1.5mm
• Compression bolt length : 20mm
• Weight : 639g (with compression bolt)

TORQUE SETTINGS

• IMPORTANT : Always use a torque wrench
• Compression bolt torque : 8 Nm (Max)
• Stem bolt torque : 13 Nm (Max)
• Hub axle torque : 8 Nm (Max)

IMPORTANT NOTES

This fork is designed and created solely for BMX RACING. It meets the EN and CPSC safety standards and complies with the EN 16054 standard.

It is always the buyer's responsibility to know their own limits and how to maintain a high-end 100% carbon fork. Carbon cannot be designed to withstand major collisions. After a fall or crash, be sure to thoroughly check your fork. If you suspect any damage, it is YOUR responsibility to have a professional assess the integrity of the fork.

Always adhere to the specified torque settings. If possible, use a split bearing ring