Pride Racing Apex Fork - 20" - 1-1/8" - 20mm - 3K Gloss

FOURCHE PRIDE RACING APEX - 20" - STRAIGHT STEERER - 20MM - 3K GLOSS

The Apex fork is the new 1-1/8" carbon fork in the Pride Racing lineup. Pride Racing unveils a fork with a more refined design than the Slik and beautiful lines on the legs. The Apex fork is built around a 7075-T6 aluminum steerer with a 5mm internal thickness to withstand the stresses of BMX Race. Its Toray® carbon fiber legs ensure reactivity, allowing for excellent power transfer and formidable steering precision.

This fork comes with the Stem Lock compression system from Pride Racing to ensure perfect compression and increased rigidity.

DETAIL :

• Leg Material : Toray® T700S and T800S Carbon Fibers / Internal structure in polymer (PMI)
• Tube Material : 7075-T6 Aluminum Tube Diameter: 1-1/8"
• Compression Screw : Stem Lock System
• Axle : 20mm
• Hub Spacing : 100mm Steerer
• Length : 157mm (non-cuttable steerer)
• Fork Height : 308mm
• Dropout Width : 8mm
• Offset : 30mm
• Color : Black
• Finish : 3K Gloss
• Weight : 592g (with Stem Lock)

IMPORTANT :

Always use a torque wrench when assembling the fork. Regular torque control is recommended. This fork must be mounted with the Stem Lock Pride Racing Apex. No warranty will be covered if this compression device is not used during assembly and use of the fork.

Complies with safety requirements EN 16054 Category 2 - Tested by an independent laboratory in France, a member of COFRAC.