Pride Racing Spiral V2 Cog - Alloy

PRIDE RACING SPIRAL V2 AL 7075

A sprocket designed for use in BMX RACE. It is a 7075-T6 Aluminium COG that resists very well to the chain friction in the long term. This sprocket has a standard Shimano mounting, fitting all Shimano driver splines. Its 5mm wide contact surface avoids marking the aluminium driver body. Compatible with 1/2 - 3/32" chains, the standard for BMX RACE use. Reverse design allows for perfect alignment of your chain. An Antidrop toothing that keeps the chain correctly aligned without the risk of derailing.

IN DETAIL :

• Material: Aluminium 7075-T6
• Reverse design to prevent derailment
• Width of bearing surface: 5mm
• Chain compatibility: 1/2 - 3/32
• Binding compatible: Standard Shimano
• Available teeth: 14T - 15T - 16T - 17T - 18T
• Weight: 17g

TECHNICAL TIPS

With a Pride Racing configuration, namely :

• Vortex 24 V2 crankset / COG Spiral V2 / Control hubs

Pride Racing offers a precise adjustment to have a perfectly straight chain line. With this diagram, you can adjust the location of your COG on your hub to have a chain line as straight as possible. These calculations are made at the French brand's design office to offer you the most optimized transmission possible.

Having a Pride Racing configuration with a 44.0 chain line - It is recommended to place your COG at this precise location to obtain an optimal chain line. Using a caliper or ruler, you can adjust your placement using the spacers provided with the rear hub.